

| Type | Qty | Description |
|---|---|---|
| 40G QSFP+ | 1 |
40G optical port with a 41.25 Gbps transmission rate.
The default configuration includes one 40G single-mode optical module.
The load capacity of a single Ethernet port can only achieve its maximum when the load width is 128 pixels or more. If the load width is less than that, the load capacity will be reduced accordingly, calculated as (128 - load width) × load height.
|
When working with the XA50 Pro receiving cards, the formula of calculating the load capacity per Ethernet port and the detailed parameters are as follows:
|
Max Load Capacity per Ethernet Port (Pixels) |
|||
|---|---|---|---|
|
Frame Rate / Bit Depth |
8bit |
10bit |
12bit |
|
24 Hz |
7,378,000 |
5,728,280 |
3,689,000 |
|
25 Hz |
7,082,800 |
5,499,149 |
3,541,440 |
|
30 Hz |
5,902,400 |
4,582,624 |
2,951,200 |
|
50 Hz |
3,541,440 |
2,749,574 |
1,770,720 |
|
60 Hz |
2,951,200 |
2,291,312 |
1,475,600 |
|
120 Hz |
1,475,600 |
1,145,656 |
737,800 |
|
144 Hz |
1,229,600 |
954,713 |
612,374 |
|
240 Hz |
737,800 |
572,828 |
368,900 |
|
300 Hz |
590,240 |
458,262 |
295,120 |
|
360 Hz |
491,800 |
381,885 |
245,900 |
|
480 Hz |
368,900 |
286,414 |
184,450 |
Note:
To achieve the maximum load capacity, the width of each rectangular load area within a single Ethernet port must be at least 128 pixels. If the width of a rectangular load area within the Ethernet port is less than 128, the loss in capacity is calculated as (128 - width of the rectangular load area) × height of the rectangular load area. The total load capacity loss for the Ethernet port is the sum of the losses for all rectangular load areas within the port.

|
Electrical Specifications |
Power consumption |
52 W |
|
Operating Environment |
Temperature |
–5°C to +45°C |
|
Humidity |
0% RH to 80% RH, non-condensing |
|
|
Storage Environment |
Temperature |
–30°C to +80°C |
|
Humidity |
0% RH to 95% RH, non-condensing |
|
|
Physical Specifications |
Dimensions |
247.1 mm × 193 mm × 24.8 mm |
|
Weight |
554.4 g |
|
|
IP Rating |
IP20 (Please prevent the product from water intrusion and do not wet or wash the product). |
|
We consistently enhance and refine the content of our Wiki articles.
If you find any mistakes or errors, please contact us.
Your continuous feedback and support will help us further improve our products and content.