¶ Appearance
¶ Interface
|
Type |
Qty |
Description |
|
|---|---|---|---|
|
ST 2110 (25G) |
2 primaries, 2 backups |
Standard |
Supports SMPTE ST 2110 (-10, 20) and SMPTE 2059 (-1, -2) standards. |
|
Backup |
Supports SMPTE 2022-7 standard. |
||
|
Resolution |
Max resolution: 4096×2160@60Hz/8192×1080@60Hz Min resolution: 800×600@60Hz |
||
|
Max height & width |
Max width: 8192 (8192×1080@60Hz) Max height: 8192 (1080×8192@60Hz) |
||
|
Frame rate |
23.98/24/25/29.97/30/47.95/48/50/59.94/60/95.90/100/119.88/120Hz/143.86/144/240 Hz |
||
|
VMP control |
Support loading video stream configuration by SDP file or directly inputting. Exporting SDP file is also supported. Support setting the resolution when managing ST 2110 source in VMP.
|
||
|
NMOS management |
NMOS registration, discovery, control, and global parameter configuration based on IS-04, IS-05, and IS-09 standards. Supports three registration methods: mDNS, DNS-SD, and Static. |
||
|
PTP settings |
Supports the IEEE 1588-2008 standard, enabling high-precision synchronization across different input sources when Lock Input to PTP is activated. |
||
|
IP address |
IPv4 DHCP and static IP |
||
|
Multicast protocol |
IGMPv3, IGMPv2 |
||
|
Ethernet |
|
||
|
Optical transceiver |
The ST 2110 (25G) card does not come with an optical transceiver by default. Please purchase one separately. We recommend using transceivers from the same vendor as your switch.
|
||
|
Cables |
OS1/OS2 optical fiber cables are recommended.
|
||
¶ Port Configuration
You can configure the port information through the following three methods:
- Using third-party NMOS management software for visualized connection setup.
- Import the SDP file in Vision Management Platform (VMP) for configuration.
- Directly input the video stream configuration in VMP.
- Video stream destination IP (primary/backup)
- Port (primary/backup)
- Video source IP (primary/backup)
- Video source details (resolution, frame rate, color space, bit depth)
¶ Video Source Specifications
| Input | Resolution |
Color Space |
Sampling | Bit Depth | Integer Frame Rate (Hz) | |
|---|---|---|---|---|---|---|
| ST 2110 (25G) | 4K | 4096×2160 | RGB / YCbCr | 4:4:4 | 8/10/12bit | 24/25/30/48/50/60 |
| YCbCr | 4:2:2 | |||||
| 3840×2160 | RGB / YCbCr | 4:4:4 | 8/10/12bit | 24/25/30/48/50/60 | ||
| YCbCr | 4:2:2 | |||||
| 2K1K | 2560×1440 | RGB / YCbCr | 4:4:4 | 8/10/12bit | 24/25/30/48/50/60/100/120/144 | |
| YCbCr | 4:2:2 | |||||
| 1920×1080 | RGB / YCbCr | 4:4:4 | 8/10/12bit | 24/25/30/48/50/60/100/120/144/240 | ||
| YCbCr | 4:2:2 | |||||
| 720P | 1280×720 | RGB / YCbCr | 4:4:4 | 8/10/12bit | 24/25/30/48/50/60/100/120/144/240 | |
| YCbCr | 4:2:2 | |||||
| 800×600 | RGB / YCbCr | 4:4:4 | 8/10/12bit | 24/25/30/48/50/60/100/120/144/240 | ||
| YCbCr | 4:2:2 | |||||
Note:
The table above only displays a selection of common resolutions and integer frame rates. Decimal frame rates are also supported, allowing for automatic frame rate adaptation from the highest frame rate of each resolution down to 23.98/29.97/47.95/59.94/95.90/119.88/143.86 Hz
¶ Specifications
|
Electrical Specifications |
Power Consumption |
43 W |
|
Operating Environment |
Temperature |
–5°C to +45°C |
|
Humidity |
0% RH to 80% RH, non-condensing |
|
|
Storage Environment |
Temperature |
–30°C to +80°C |
|
Humidity |
0% RH to 95% RH, non-condensing |
|
|
Physical Specifications |
Dimensions |
247.1 mm × 193 mm × 24.8 mm |
|
Weight |
536.1 g |
|
|
IP Rating |
IP20 (Please prevent the product from water intrusion and do not wet or wash the product). |
|
We consistently enhance and refine the content of our Wiki articles.
If you find any mistakes or errors, please contact us.
Your continuous feedback and support will help us further improve our products and content.